Effect of preheat repetition on color stability of methacrylate- and silorane-based composite resins

Effect of preheat repetition on color stability of methacrylate- and silorane-based composite resins


چاپ صفحه
پژوهان
صفحه نخست سامانه
چکیده مقاله
چکیده مقاله
نویسندگان
نویسندگان
دانلود مقاله
دانلود مقاله
دانشگاه علوم پزشکی تبریز
دانشگاه علوم پزشکی تبریز

نویسندگان: مهدی عابد کهنمویی , سهند ریخته گران , مهدی دانشپوی , سودابه کیمیائی , پرنیان علیزاده اسکویی , یاشار رضاعی

کلمات کلیدی: Composite resin, preheating, microleakage, color stability

نشریه: 19913 , 4 , 11 , 2017

اطلاعات کلی مقاله
hide/show

نویسنده ثبت کننده مقاله مهدی عابد کهنمویی
مرحله جاری مقاله تایید نهایی
دانشکده/مرکز مربوطه مرکز تحقیقات لثه و دندان
کد مقاله 62097
عنوان فارسی مقاله Effect of preheat repetition on color stability of methacrylate- and silorane-based composite resins
عنوان لاتین مقاله Effect of preheat repetition on color stability of methacrylate- and silorane-based composite resins
ناشر 7
آیا مقاله از طرح تحقیقاتی و یا منتورشیپ استخراج شده است؟ بلی
عنوان نشریه (خارج از لیست فوق) -
نوع مقاله Original Article
نحوه ایندکس شدن مقاله ایندکس شده سطح دو – PubMed
آدرس لینک مقاله/ همایش در شبکه اینترنت https://www.ncbi.nlm.nih.gov/pubmed/?term=Effect+of+preheat+repetition+on+color+stability+of+methacrylate-+and+silorane-based+co

خلاصه مقاله
hide/show

Background. The aim of this study was to investigate the effect of preheating methacrylate- and silorane-based composite resins on their color stability up to 40 times at 55‒60°C. Methods. Seventy-six methacrylate and silorane-based composite resin samples, with a diameter of 10 mm and a height of 2 mm, were divided into 4 groups (n=19). After the samples were prepared, their color parameters were determined using a reflective spectrophotometer. The composite resin samples were separately stored in a solution of tea for 40 consecutive days. Then the samples underwent a color determination procedure again using a spectrophotometer and color changes were recorded. Finally two-way ANOVA was used to study the effect of composite temperature on its staining (P<0.05). Independent-samples t-test was used to evaluate changes in conversion rates of preheated composite resin samples compared to non-heated samples at P=0.005 and P=0.029 for silorane-based and Z250 composite resin samples, respectively. Results. Both composite resin type (P=0.014) and preheating (P<0.001) had significant effects on ΔE. Conclusion. Repeated preheating of methacrylate- and silorane-based composite resin samples, up to 55‒60°C for 40 rounds, resulted in more color changes compared with unheated composite resin samples. After storage in a solution of tea the color change rate in the composite resin samples of silorane-based was higher than the Z250 composite resin samples.

نویسندگان
hide/show

نویسنده نفر چندم مقاله
مهدی عابد کهنموییاول
سهند ریخته گرانسوم
مهدی دانشپویچهارم
سودابه کیمیائیپنجم
پرنیان علیزاده اسکوییششم
یاشار رضاعیهفتم

لینک دانلود مقاله
hide/show

نام فایل تاریخ درج فایل اندازه فایل دانلود
Kahnamoeei.pdf1396/10/26211939دانلود