The Effect of Different Mixing Methods on Working Time, Setting Time, Dimensional Changes and Film Thickness of Mineral Trioxide Aggregate and Calcium-Enriched Mixture.
The Effect of Different Mixing Methods on Working Time, Setting Time, Dimensional Changes and Film Thickness of Mineral Trioxide Aggregate and Calcium-Enriched Mixture.
نویسندگان: شهریار شاهی , نگین قاسمی , سعید رحیمی دره چی , حمیدرضا یاوری , مریم جانانی , هادی مختاری زنوز , محمود بهاری
کلمات کلیدی: Calcium-Enriched Mixture; Dimensional Changes; Film Thickness; Mineral Trioxide Aggregate; Setting Time; Working Time
نشریه: , 4 , 10 , 2015
| نویسنده ثبت کننده مقاله |
محمود بهاری |
| مرحله جاری مقاله |
تایید نهایی |
| دانشکده/مرکز مربوطه |
دانشکده دندانپزشکی |
| کد مقاله |
58090 |
| عنوان فارسی مقاله |
The Effect of Different Mixing Methods on Working Time, Setting Time, Dimensional Changes and Film Thickness of Mineral Trioxide Aggregate and Calcium-Enriched Mixture. |
| عنوان لاتین مقاله |
The Effect of Different Mixing Methods on Working Time, Setting Time, Dimensional Changes and Film Thickness of Mineral Trioxide Aggregate and Calcium-Enriched Mixture. |
| ناشر |
8 |
| آیا مقاله از طرح تحقیقاتی و یا منتورشیپ استخراج شده است؟ |
خیر |
| عنوان نشریه (خارج از لیست فوق) |
Iranian Endodontic Journal |
| نوع مقاله |
Original Article |
| نحوه ایندکس شدن مقاله |
ایندکس شده سطح دو – PubMed |
| آدرس لینک مقاله/ همایش در شبکه اینترنت |
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4609663/ |
| Introduction: The aim of the present study was to evaluate the effect of different mixing
techniques (conventional, amalgamator and ultrasonic mixing) on the physical properties the
working time (WT), setting time (ST), dimensional changes (DC) and film thickness (FT)]
of calcium-enriched mixture (CEM) cement and mineral trioxide aggregate (MTA). Methods
and Materials: The mentioned physical properties were determined using the ISO 6786:2001
specification. Six samples of each material were prepared for three mixing techniques (totally
36 samples). Data were analyzed using descriptive statistics, two-way ANOVA and Post Hoc
Tukey’s tests. The level of significance was defined at 0.05. Results: Irrespective of mixing
technique, there was no significant difference between the WT and FT of the tested materials.
Except for the DC of MTA and the FT of the all materials, other properties were significantly
affected with mixing techniques (P<0.05). The ultrasonic technique decreased the ST of MTA
and CEM cement and increased the WT of CEM cement (P<0.05). Conclusion: The mixing
technique of the materials had no significant effect on the dimensional changes of MTA and
the film thickness of both materials. |
| نام فایل |
تاریخ درج فایل |
اندازه فایل |
دانلود |
| iej-10-248.pdf | 1395/03/23 | 230126 | دانلود |